D&C GLug - Home Page

[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]

Re: [LUG] Getting to UEFI

 

On 01/04/17 18:08, mr meowski wrote:
On 01/04/17 17:30, Neil via list wrote:
Further to this message, I tried the following

sudo efibootmgr
efibootmgr: EFI variables are not supported on this system.

Is that to be expected?

Entirely, your PC is definitely switched to BIOS mode rather than UEFI,
although the hotkey will remain the same (F2 or Del, according to the
the manual). efibootmgr shouldn't even be installed in your case...

To be honest I'd expect a third party installer to do exactly that,
setting up EFI with Linux can be a bit painful unless you're used to it
so they effectively took the "easy" - and arguably sensible - route. Why
introduce complexity needlessly after all?

Apparently the PCH setup for your motherboard is a bit... odd in that
depending on how they've hooked up the internals your USB ports might
not behave entirely as expected, especially not in the early stages. Do
you know if you have a M2 SSD installed? That will potentially
deactivate some of the internal SATA ports. Also some of your USB ports
may not actually be functional at all, or only post-boot.

Don't know much about the HD, it is an SSD. I found the following,

ATA OCZ-TRION 150

Is that any use?


Try moving the keyboard to a couple of different ports if your results
seem a bit random. Avoid the front panel ones if possible.

I have several USB ports. As far as I know they are all working. I have the keyboard linked to one on the rear of the machine. Here is the output from lsusb if that is any help.

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0451:8140 Texas Instruments, Inc.
Bus 002 Device 002: ID 0451:8140 Texas Instruments, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04d9:4545 Holtek Semiconductor, Inc.
Bus 001 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 001 Device 003: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



I suspect that mercilessly spamming both the F2 and Del keys during boot
*will* get you into the BIOS with a couple of tries now you've confirmed
that F11 does bring up the boot menu... sometimes.

Man, computers are a pain in the ass sometimes.

Cheers

Can but hope,

Neil


--
The Mailing List for the Devon & Cornwall LUG
https://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/listfaq