[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
--- On Mon, 11/1/10, dandart@xxxxxxxxxxxxxx <dandart@xxxxxxxxxxxxxx> wrote: > From: dandart@xxxxxxxxxxxxxx <dandart@xxxxxxxxxxxxxx> > Subject: Re: [LUG] Debian and home hubs. > To: "JOHN DAVEY" <johndavey303@xxxxxxxxxxxxxx> > Date: Monday, 11 January, 2010, 17:57 > Lenny doesn't have any non-free > wireless firmware so you might have a bit of trouble unless > you download the firmware from the website (using ethernet > or a USB from another computer). > Ubuntu has them all, > but Debian is so free it takes them all out of the default > install. > > Check by running "dmesg" to > check if it was looking for firmware it couldn't > find. > > Cheers OK, I did that and got; es: 127619 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 1729.074 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 500036k/514496k available (1770k kernel code, 13848k reserved, 750k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdf670000 ( 502 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02baaa1 - 0xc0376620 ( 750 kB) [ 0.004000] .text : 0xc0100000 - 0xc02baaa1 (1770 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083958] Calibrating delay using timer specific routine.. 3462.43 BogoMIPS (lpj=6924877) [ 0.083996] Security Framework initialized [ 0.084003] SELinux: Disabled at boot. [ 0.084005] Capability LSM initialized [ 0.084005] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 1024K [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] SMP alternatives: switching to UP code [ 0.104006] ACPI: Core revision 20080321 [ 0.120007] ENABLING IO-APIC IRQs [ 0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.159729] CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 08 [ 0.160010] Brought up 1 CPUs [ 0.160010] Total of 1 processors activated (3462.43 BogoMIPS). [ 0.160010] CPU0 attaching sched-domain: [ 0.160010] domain 0: span 0 [ 0.160010] groups: 0 [ 0.160010] net_namespace: 660 bytes [ 0.160010] Booting paravirtualized kernel on bare hardware [ 0.160010] NET: Registered protocol family 16 [ 0.160010] ACPI: bus type pci registered [ 0.160010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.160010] PCI: Not using MMCONFIG. [ 0.160010] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7 [ 0.160010] PCI: Using configuration type 1 for base access [ 0.160010] Setting up standard PCI resources [ 0.160778] ACPI: EC: Look up EC in DSDT [ 0.187436] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.188011] ACPI: Interpreter enabled [ 0.188011] ACPI: (supports S0 S3 S4 S5) [ 0.188011] ACPI: Using IOAPIC for interrupt routing [ 0.188011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.261207] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.261210] PCI: Using MMCONFIG for extended config space [ 0.261515] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.380793] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.380796] ACPI: EC: driver started in interrupt mode [ 0.380845] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.381758] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.381763] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.382709] PCI: Transparent bridge - 0000:00:1e.0 [ 0.382776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.383174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.383334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.383492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.383667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.504580] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.504710] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.504836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.504963] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.505090] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.505217] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.505344] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.505471] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.505646] ACPI: Power Resource [FN00] (off) [ 0.506009] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.506042] pnp: PnP ACPI init [ 0.506049] ACPI: bus type pnp registered [ 0.576319] pnp: PnP ACPI: found 10 devices [ 0.576322] ACPI: ACPI bus type pnp unregistered [ 0.576326] PnPBIOS: Disabled by ACPI PNP [ 0.576573] PCI: Using ACPI for IRQ routing [ 0.576736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.576741] hpet0: 3 64-bit timers, 14318180 Hz [ 0.577798] ACPI: RTC can wake from S4 [ 0.577826] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.577829] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.577833] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.577836] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.577839] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.577842] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.577846] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.577849] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.577857] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.577864] system 00:06: ioport range 0x3e8-0x3ef has been reserved [ 0.577867] system 00:06: ioport range 0x400-0x401 has been reserved [ 0.577870] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.577874] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.577877] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.577880] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.577883] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.577886] system 00:06: ioport range 0xfe00-0xfe01 has been reserved [ 0.580097] Switched to high resolution mode on CPU 0 [ 0.608293] PCI: region 0000:07:06.0/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.608299] PCI: Bridge: 0000:00:1c.0 [ 0.608300] IO window: disabled. [ 0.608306] MEM window: disabled. [ 0.608311] PREFETCH window: disabled. [ 0.608318] PCI: Bridge: 0000:00:1c.1 [ 0.608322] IO window: 2000-2fff [ 0.608328] MEM window: 0xf0700000-0xf07fffff [ 0.608333] PREFETCH window: 0x00000000f0200000-0x00000000f03fffff [ 0.608341] PCI: Bridge: 0000:00:1c.2 [ 0.608344] IO window: 3000-3fff [ 0.608350] MEM window: 0xf0800000-0xf08fffff [ 0.608355] PREFETCH window: 0x00000000f0400000-0x00000000f05fffff [ 0.608370] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 0.608372] IO window: 0x00004400-0x000044ff [ 0.608377] IO window: 0x00004800-0x000048ff [ 0.608383] MEM window: 0x30000000-0x33ffffff [ 0.608388] PCI: Bridge: 0000:00:1e.0 [ 0.608392] IO window: 4000-4fff [ 0.608398] MEM window: 0xf0900000-0xf09fffff [ 0.608402] PREFETCH window: disabled. [ 0.608434] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.608441] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.608465] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.608472] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.608495] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.608502] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.608516] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.608533] pci 0000:07:06.0: enabling device (0000 -> 0003) [ 0.608538] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.608566] NET: Registered protocol family 2 [ 0.608668] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.608855] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.608952] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.609047] TCP: Hash tables configured (established 16384 bind 16384) [ 0.609051] TCP reno registered [ 0.609129] NET: Registered protocol family 1 [ 0.609237] checking if image is initramfs... it is [ 1.164271] Freeing initrd memory: 6074k freed [ 1.164455] Simple Boot Flag at 0x36 set to 0x1 [ 1.165035] audit: initializing netlink socket (disabled) [ 1.165052] type=2000 audit(1263510898.164:1): initialized [ 1.165169] Total HugeTLB memory allocated, 0 [ 1.165246] VFS: Disk quotas dquot_6.5.1 [ 1.165273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.165310] msgmni has been set to 988 [ 1.165416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.165420] io scheduler noop registered [ 1.165422] io scheduler anticipatory registered [ 1.165425] io scheduler deadline registered [ 1.165435] io scheduler cfq registered (default) [ 1.165449] pci 0000:00:02.0: Boot video device [ 1.165561] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling [ 1.165668] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.165716] assign_interrupt_mode Found MSI capability [ 1.165765] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.165804] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.165843] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.165947] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.165993] assign_interrupt_mode Found MSI capability [ 1.166039] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.166086] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.166121] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.166223] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.166270] assign_interrupt_mode Found MSI capability [ 1.166316] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.166351] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.166388] Allocate Port Service[0000:00:1c.2:pcie03] [ 1.166717] isapnp: Scanning for PnP cards... [ 1.521065] isapnp: No Plug & Play device found [ 1.523698] hpet_resources: 0xfed00000 is busy [ 1.523763] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.525542] brd: module loaded [ 1.525639] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.528116] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.529908] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.529914] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.529917] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.529920] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.529922] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.530071] mice: PS/2 mouse device common for all mice [ 1.530283] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.530307] rtc0: alarms up to one month, y3k [ 1.530338] cpuidle: using governor ladder [ 1.530340] cpuidle: using governor menu [ 1.530345] No iBFT detected. [ 1.530754] TCP cubic registered [ 1.530758] NET: Registered protocol family 17 [ 1.530766] Using IPI No-Shortcut mode [ 1.530880] registered taskstats version 1 [ 1.531030] rtc_cmos 00:07: setting system clock to 2010-01-14 23:14:59 UTC (1263510899) [ 1.531158] Freeing unused kernel memory: 244k freed [ 1.617398] ACPI: Transitioning device [FAN0] to D3 [ 1.617496] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.617502] ACPI: Fan [FAN0] (off) [ 1.624541] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.624586] ACPI: ACPI0007:00 is registered as cooling_device1 [ 1.624591] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.626146] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.626224] ACPI: Thermal Zone [TZ00] (46 C) [ 1.626870] ACPI: LNXTHERM:02 is registered as thermal_zone1 [ 1.627347] ACPI: Transitioning device [FAN0] to D0 [ 1.627350] ACPI: Unable to turn cooling device [dec38fcc] 'on' [ 1.627354] ACPI: Thermal Zone [TZ01] (46 C) [ 1.651068] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.104357] ACPI: ACPI Dock Station Driver [ 2.352673] usbcore: registered new interface driver usbfs [ 2.352705] usbcore: registered new interface driver hub [ 2.352736] usbcore: registered new device driver usb [ 2.362428] USB Universal Host Controller Interface driver v3.0 [ 2.362477] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.362489] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.362493] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.362633] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.362672] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 2.362759] usb usb1: configuration #1 chosen from 1 choice [ 2.362789] hub 1-0:1.0: USB hub found [ 2.362796] hub 1-0:1.0: 2 ports detected [ 2.464148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.464153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.464156] usb usb1: Product: UHCI Host Controller [ 2.464159] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.464161] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.464224] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.464235] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.464240] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.464263] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.464300] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 2.464381] usb usb2: configuration #1 chosen from 1 choice [ 2.464408] hub 2-0:1.0: USB hub found [ 2.464417] hub 2-0:1.0: 2 ports detected [ 2.493409] SCSI subsystem initialized [ 2.527659] libata version 3.00 loaded. [ 2.546794] sdhci: Secure Digital Host Controller Interface driver [ 2.546798] sdhci: Copyright(c) Pierre Ossman [ 2.556110] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 2.556114] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.568129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.568134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.568137] usb usb2: Product: UHCI Host Controller [ 2.568139] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.568141] usb usb2: SerialNumber: 0000:00:1d.1 [ 2.568221] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.568232] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.568237] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.568261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.568301] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 2.568381] usb usb3: configuration #1 chosen from 1 choice [ 2.568408] hub 3-0:1.0: USB hub found [ 2.568415] hub 3-0:1.0: 2 ports detected [ 2.672150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.672155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.672158] usb usb3: Product: UHCI Host Controller [ 2.672160] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.672163] usb usb3: SerialNumber: 0000:00:1d.2 [ 2.672224] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 2.672236] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 2.672240] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.672263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.672304] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 2.672387] usb usb4: configuration #1 chosen from 1 choice [ 2.672415] hub 4-0:1.0: USB hub found [ 2.672422] hub 4-0:1.0: 2 ports detected [ 2.759083] Marking TSC unstable due to: TSC halts in idle. [ 2.776150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.776153] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.776156] usb usb4: Product: UHCI Host Controller [ 2.776158] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.776160] usb usb4: SerialNumber: 0000:00:1d.3 [ 2.776484] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.776499] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 2.776504] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.776528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.780463] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.780470] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 2.780478] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0d44000 [ 2.796059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.796143] usb usb5: configuration #1 chosen from 1 choice [ 2.796176] hub 5-0:1.0: USB hub found [ 2.796185] hub 5-0:1.0: 8 ports detected [ 2.900168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.900172] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.900175] usb usb5: Product: EHCI Host Controller [ 2.900177] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 2.900180] usb usb5: SerialNumber: 0000:00:1d.7 [ 2.900384] ata_piix 0000:00:1f.2: version 2.12 [ 2.900412] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.900418] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.056043] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.056129] scsi0 : ata_piix [ 3.056368] scsi1 : ata_piix [ 3.057545] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 3.057549] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 3.220489] ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101M, max UDMA/100 [ 3.220493] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.228492] ata1.00: configured for UDMA/100 [ 3.392532] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33 [ 3.408473] ata2.00: configured for UDMA/33 [ 3.408577] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5 [ 3.410486] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 [ 3.410641] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.460449] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.463497] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0) [ 3.463520] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18 [ 3.463583] mmc0: SDHCI at 0xf0906800 irq 18 DMA [ 3.469833] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.496499] e100: eth0: e100_probe: addr 0xf0905000, irq 20, MAC addr 00:a0:d1:6b:b0:80 [ 3.507737] Uniform Multi-Platform E-IDE driver [ 3.507742] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.540507] Driver 'sd' needs updating - please use bus_type methods [ 3.540617] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 3.540639] sd 0:0:0:0: [sda] Write Protect is off [ 3.540642] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.540679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.540748] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 3.540769] sd 0:0:0:0: [sda] Write Protect is off [ 3.540772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.540808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.540812] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 3.570844] sda1 sda2 < sda5 > [ 3.596552] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.601558] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.601564] Uniform CD-ROM driver Revision: 3.20 [ 3.601659] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.620667] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.620690] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.830685] PM: Starting manual resume from disk [ 3.884335] kjournald starting. Commit interval 5 seconds [ 3.884335] EXT3-fs: mounted filesystem with ordered data mode. [ 5.579336] udevd version 125 started [ 6.590717] Linux agpgart interface v0.103 [ 6.596376] agpgart: Detected an Intel 945GM Chipset. [ 6.596580] agpgart: Detected 7932K stolen memory. [ 6.613988] agpgart: AGP aperture is 256M @ 0xd0000000 [ 7.002940] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 7.002970] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 7.038039] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... [ 7.080398] input: Power Button (FF) as /class/input/input1 [ 7.108723] ACPI: Power Button (FF) [PWRF] [ 7.108791] input: Lid Switch as /class/input/input2 [ 7.127173] ACPI: Lid Switch [LID] [ 7.127239] input: Power Button (CM) as /class/input/input3 [ 7.157830] ACPI: Power Button (CM) [PWRB] [ 7.198217] ACPI: AC Adapter [ADP0] (on-line) [ 7.332578] ACPI: Battery Slot [BAT0] (battery present) [ 7.871095] ACPI: device:04 is registered as cooling_device2 [ 7.871338] input: Video Bus as /class/input/input4 [ 7.944379] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 7.950850] ACPI: device:0a is registered as cooling_device3 [ 7.950966] input: Video Bus as /class/input/input5 [ 7.984097] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.338039] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 8.338055] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 8.338082] ath5k_pci 0000:05:00.0: registered as 'phy0' [ 8.516172] intel_rng: FWH not detected [ 8.679750] phy0: Selected rate control algorithm 'pid' [ 8.852610] ath5k phy0: Atheros AR2424 chip found (MAC: 0xa0, PHY: 0x61) [ 8.852961] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] [ 8.852987] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 8.852989] IO window: 0x00004400-0x000044ff [ 8.852995] IO window: 0x00004800-0x000048ff [ 8.853000] PREFETCH window: 0x34400000-0x347fffff [ 8.853006] MEM window: 0x30000000-0x33ffffff [ 8.853013] Yenta: Enabling burst memory read transactions [ 8.853019] Yenta: Using CSCINT to route CSC interrupts to PCI [ 8.853022] Yenta: Routing CardBus interrupts to PCI [ 8.853027] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66 [ 9.084833] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 9.084838] Socket status: 30000006 [ 9.084841] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b [ 9.084846] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 9.084849] cs: IO port probe 0x4000-0x4fff: clean. [ 9.085076] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff [ 9.085436] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 9.154315] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 9.424092] input: PC Speaker as /class/input/input6 [ 10.077511] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 [ 10.077519] synaptics: Toshiba Satellite Pro A100 detected, limiting rate to 40pps. [ 10.109426] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 10.369947] cs: IO port probe 0x100-0x3af: clean. [ 10.372456] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 10.373248] cs: IO port probe 0x820-0x8ff: clean. [ 10.373938] cs: IO port probe 0xc00-0xcf7: clean. [ 10.374748] cs: IO port probe 0xa00-0xaff: clean. [ 11.102109] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 11.452895] EXT3 FS on sda1, internal journal [ 11.693357] loop: module loaded [ 13.268628] NET: Registered protocol family 10 [ 13.269064] lo: Disabled Privacy Extensions [ 13.335482] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.336137] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 13.336796] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.752675] lp: driver loaded but no devices found [ 19.781447] ppdev: user-space parallel port driver [ 21.353823] RPC: Registered udp transport module. [ 21.353830] RPC: Registered tcp transport module. [ 21.407595] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 21.463280] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 21.481139] NFSD: starting 90-second grace period [ 24.016022] eth0: no IPv6 routers present [ 24.566009] Bluetooth: Core ver 2.11 [ 24.598842] NET: Registered protocol family 31 [ 24.598847] Bluetooth: HCI device and connection manager initialized [ 24.598851] Bluetooth: HCI socket layer initialized [ 24.669836] Bluetooth: L2CAP ver 2.9 [ 24.669842] Bluetooth: L2CAP socket layer initialized [ 24.845316] Bluetooth: RFCOMM socket layer initialized [ 24.845334] Bluetooth: RFCOMM TTY layer initialized [ 24.845337] Bluetooth: RFCOMM ver 1.8 [ 25.116226] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.532054] NET: Registered protocol family 5 [ 30.216083] [drm] Initialized drm 1.1.0 20060810 [ 30.230316] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 30.230326] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.230406] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 42.024024] eth0: no IPv6 routers present puter:/home/jon# ...someone will have to tell me what this means. I've got no idea. Hope fully it might be informative. Cheers, JOn -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html