[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
Cheers DanOn 15 Jan 2010, at 00:11, JOHN DAVEY <johndavey303@xxxxxxxxxxxxxx> wrote:
--- On Mon, 11/1/10, dandart@xxxxxxxxxxxxxx <dandart@xxxxxxxxxxxxxx> wrote:From: dandart@xxxxxxxxxxxxxx <dandart@xxxxxxxxxxxxxx> Subject: Re: [LUG] Debian and home hubs. To: "JOHN DAVEY" <johndavey303@xxxxxxxxxxxxxx> Date: Monday, 11 January, 2010, 17:57 Lenny doesn't have any non-free wireless firmware so you might have a bit of trouble unless you download the firmware from the website (using ethernet or a USB from another computer). Ubuntu has them all, but Debian is so free it takes them all out of the default install. Check by running "dmesg" to check if it was looking for firmware it couldn't find. CheersOK, I did that and got; es: 127619 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 1729.074 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 500036k/514496k available (1770k kernel code, 13848k reserved, 750k data, 244k init, 0k highmem)[ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdf670000 ( 502 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02baaa1 - 0xc0376620 ( 750 kB) [ 0.004000] .text : 0xc0100000 - 0xc02baaa1 (1770 kB)[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered[ 0.083958] Calibrating delay using timer specific routine.. 3462.43 BogoMIPS (lpj=6924877)[ 0.083996] Security Framework initialized [ 0.084003] SELinux: Disabled at boot. [ 0.084005] Capability LSM initialized [ 0.084005] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 1024K [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] SMP alternatives: switching to UP code [ 0.104006] ACPI: Core revision 20080321 [ 0.120007] ENABLING IO-APIC IRQs [ 0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.159729] CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 08[ 0.160010] Brought up 1 CPUs [ 0.160010] Total of 1 processors activated (3462.43 BogoMIPS). [ 0.160010] CPU0 attaching sched-domain: [ 0.160010] domain 0: span 0 [ 0.160010] groups: 0 [ 0.160010] net_namespace: 660 bytes [ 0.160010] Booting paravirtualized kernel on bare hardware [ 0.160010] NET: Registered protocol family 16 [ 0.160010] ACPI: bus type pci registered[ 0.160010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255[ 0.160010] PCI: Not using MMCONFIG.[ 0.160010] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7[ 0.160010] PCI: Using configuration type 1 for base access [ 0.160010] Setting up standard PCI resources [ 0.160778] ACPI: EC: Look up EC in DSDT [ 0.187436] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.188011] ACPI: Interpreter enabled [ 0.188011] ACPI: (supports S0 S3 S4 S5) [ 0.188011] ACPI: Using IOAPIC for interrupt routing[ 0.188011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.261207] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources[ 0.261210] PCI: Using MMCONFIG for extended config space[ 0.261515] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.380793] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62[ 0.380796] ACPI: EC: driver started in interrupt mode [ 0.380845] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 0.381758] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.381763] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO[ 0.382709] PCI: Transparent bridge - 0000:00:1e.0 [ 0.382776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 0.383174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.383334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.383492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.383667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.504580] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15 ) [ 0.504710] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15 ) [ 0.504836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.504963] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.505090] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15 ) [ 0.505217] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.505344] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15 ) [ 0.505471] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15 )[ 0.505646] ACPI: Power Resource [FN00] (off) [ 0.506009] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.506042] pnp: PnP ACPI init [ 0.506049] ACPI: bus type pnp registered [ 0.576319] pnp: PnP ACPI: found 10 devices [ 0.576322] ACPI: ACPI bus type pnp unregistered [ 0.576326] PnPBIOS: Disabled by ACPI PNP [ 0.576573] PCI: Using ACPI for IRQ routing [ 0.576736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.576741] hpet0: 3 64-bit timers, 14318180 Hz [ 0.577798] ACPI: RTC can wake from S4[ 0.577826] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.577829] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.577833] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.577836] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.577839] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.577842] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.577846] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.577849] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.577857] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.577864] system 00:06: ioport range 0x3e8-0x3ef has been reserved [ 0.577867] system 00:06: ioport range 0x400-0x401 has been reserved [ 0.577870] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.577874] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.577877] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.577880] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.577883] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.577886] system 00:06: ioport range 0xfe00-0xfe01 has been reserved[ 0.580097] Switched to high resolution mode on CPU 0[ 0.608293] PCI: region 0000:07:06.0/9 too large: 0x0000000000000000-0x0000000003ffffff[ 0.608299] PCI: Bridge: 0000:00:1c.0 [ 0.608300] IO window: disabled. [ 0.608306] MEM window: disabled. [ 0.608311] PREFETCH window: disabled. [ 0.608318] PCI: Bridge: 0000:00:1c.1 [ 0.608322] IO window: 2000-2fff [ 0.608328] MEM window: 0xf0700000-0xf07fffff[ 0.608333] PREFETCH window: 0x00000000f0200000-0x00000000f03fffff[ 0.608341] PCI: Bridge: 0000:00:1c.2 [ 0.608344] IO window: 3000-3fff [ 0.608350] MEM window: 0xf0800000-0xf08fffff[ 0.608355] PREFETCH window: 0x00000000f0400000-0x00000000f05fffff[ 0.608370] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 0.608372] IO window: 0x00004400-0x000044ff [ 0.608377] IO window: 0x00004800-0x000048ff [ 0.608383] MEM window: 0x30000000-0x33ffffff [ 0.608388] PCI: Bridge: 0000:00:1e.0 [ 0.608392] IO window: 4000-4fff [ 0.608398] MEM window: 0xf0900000-0xf09fffff [ 0.608402] PREFETCH window: disabled.[ 0.608434] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17[ 0.608441] PCI: Setting latency timer of device 0000:00:1c.0 to 64[ 0.608465] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16[ 0.608472] PCI: Setting latency timer of device 0000:00:1c.1 to 64[ 0.608495] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18[ 0.608502] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.608516] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.608533] pci 0000:07:06.0: enabling device (0000 -> 0003)[ 0.608538] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18[ 0.608566] NET: Registered protocol family 2[ 0.608668] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.608855] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.608952] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.609047] TCP: Hash tables configured (established 16384 bind 16384)[ 0.609051] TCP reno registered [ 0.609129] NET: Registered protocol family 1 [ 0.609237] checking if image is initramfs... it is [ 1.164271] Freeing initrd memory: 6074k freed [ 1.164455] Simple Boot Flag at 0x36 set to 0x1 [ 1.165035] audit: initializing netlink socket (disabled) [ 1.165052] type=2000 audit(1263510898.164:1): initialized [ 1.165169] Total HugeTLB memory allocated, 0 [ 1.165246] VFS: Disk quotas dquot_6.5.1[ 1.165273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 1.165310] msgmni has been set to 988[ 1.165416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 1.165420] io scheduler noop registered [ 1.165422] io scheduler anticipatory registered [ 1.165425] io scheduler deadline registered [ 1.165435] io scheduler cfq registered (default) [ 1.165449] pci 0000:00:02.0: Boot video device[ 1.165561] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling[ 1.165668] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.165716] assign_interrupt_mode Found MSI capability [ 1.165765] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.165804] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.165843] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.165947] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.165993] assign_interrupt_mode Found MSI capability [ 1.166039] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.166086] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.166121] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.166223] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.166270] assign_interrupt_mode Found MSI capability [ 1.166316] Allocate Port Service[0000:00:1c.2:pcie00] [ 1.166351] Allocate Port Service[0000:00:1c.2:pcie02] [ 1.166388] Allocate Port Service[0000:00:1c.2:pcie03] [ 1.166717] isapnp: Scanning for PnP cards... [ 1.521065] isapnp: No Plug & Play device found [ 1.523698] hpet_resources: 0xfed00000 is busy[ 1.523763] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[ 1.525542] brd: module loaded[ 1.525639] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.528116] i8042.c: Detected active multiplexing controller, rev 1.1.[ 1.529908] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.529914] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.529917] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.529920] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.529922] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.530071] mice: PS/2 mouse device common for all mice [ 1.530283] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.530307] rtc0: alarms up to one month, y3k [ 1.530338] cpuidle: using governor ladder [ 1.530340] cpuidle: using governor menu [ 1.530345] No iBFT detected. [ 1.530754] TCP cubic registered [ 1.530758] NET: Registered protocol family 17 [ 1.530766] Using IPI No-Shortcut mode [ 1.530880] registered taskstats version 1[ 1.531030] rtc_cmos 00:07: setting system clock to 2010-01-14 23:14:59 UTC (1263510899)[ 1.531158] Freeing unused kernel memory: 244k freed [ 1.617398] ACPI: Transitioning device [FAN0] to D3 [ 1.617496] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.617502] ACPI: Fan [FAN0] (off) [ 1.624541] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.624586] ACPI: ACPI0007:00 is registered as cooling_device1 [ 1.624591] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.626146] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.626224] ACPI: Thermal Zone [TZ00] (46 C) [ 1.626870] ACPI: LNXTHERM:02 is registered as thermal_zone1 [ 1.627347] ACPI: Transitioning device [FAN0] to D0 [ 1.627350] ACPI: Unable to turn cooling device [dec38fcc] 'on' [ 1.627354] ACPI: Thermal Zone [TZ01] (46 C)[ 1.651068] input: AT Translated Set 2 keyboard as /class/input/ input0[ 2.104357] ACPI: ACPI Dock Station Driver [ 2.352673] usbcore: registered new interface driver usbfs [ 2.352705] usbcore: registered new interface driver hub [ 2.352736] usbcore: registered new device driver usb [ 2.362428] USB Universal Host Controller Interface driver v3.0[ 2.362477] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23[ 2.362489] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.362493] uhci_hcd 0000:00:1d.0: UHCI Host Controller[ 2.362633] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1[ 2.362672] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 2.362759] usb usb1: configuration #1 chosen from 1 choice [ 2.362789] hub 1-0:1.0: USB hub found [ 2.362796] hub 1-0:1.0: 2 ports detected[ 2.464148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.464153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.464156] usb usb1: Product: UHCI Host Controller [ 2.464159] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.464161] usb usb1: SerialNumber: 0000:00:1d.0[ 2.464224] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19[ 2.464235] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.464240] uhci_hcd 0000:00:1d.1: UHCI Host Controller[ 2.464263] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2[ 2.464300] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 2.464381] usb usb2: configuration #1 chosen from 1 choice [ 2.464408] hub 2-0:1.0: USB hub found [ 2.464417] hub 2-0:1.0: 2 ports detected [ 2.493409] SCSI subsystem initialized [ 2.527659] libata version 3.00 loaded. [ 2.546794] sdhci: Secure Digital Host Controller Interface driver [ 2.546798] sdhci: Copyright(c) Pierre Ossman [ 2.556110] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 2.556114] e100: Copyright(c) 1999-2006 Intel Corporation[ 2.568129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.568134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.568137] usb usb2: Product: UHCI Host Controller [ 2.568139] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.568141] usb usb2: SerialNumber: 0000:00:1d.1[ 2.568221] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18[ 2.568232] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.568237] uhci_hcd 0000:00:1d.2: UHCI Host Controller[ 2.568261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3[ 2.568301] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 2.568381] usb usb3: configuration #1 chosen from 1 choice [ 2.568408] hub 3-0:1.0: USB hub found [ 2.568415] hub 3-0:1.0: 2 ports detected[ 2.672150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.672155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.672158] usb usb3: Product: UHCI Host Controller [ 2.672160] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.672163] usb usb3: SerialNumber: 0000:00:1d.2[ 2.672224] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16[ 2.672236] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 2.672240] uhci_hcd 0000:00:1d.3: UHCI Host Controller[ 2.672263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4[ 2.672304] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 2.672387] usb usb4: configuration #1 chosen from 1 choice [ 2.672415] hub 4-0:1.0: USB hub found [ 2.672422] hub 4-0:1.0: 2 ports detected [ 2.759083] Marking TSC unstable due to: TSC halts in idle.[ 2.776150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.776153] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.776156] usb usb4: Product: UHCI Host Controller [ 2.776158] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.776160] usb usb4: SerialNumber: 0000:00:1d.3[ 2.776484] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23[ 2.776499] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 2.776504] ehci_hcd 0000:00:1d.7: EHCI Host Controller[ 2.776528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5[ 2.780463] ehci_hcd 0000:00:1d.7: debug port 1[ 2.780470] PCI: cache line size of 32 is not supported by device 0000:00:1d.7[ 2.780478] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0d44000[ 2.796059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004[ 2.796143] usb usb5: configuration #1 chosen from 1 choice [ 2.796176] hub 5-0:1.0: USB hub found [ 2.796185] hub 5-0:1.0: 8 ports detected[ 2.900168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.900172] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.900175] usb usb5: Product: EHCI Host Controller [ 2.900177] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 2.900180] usb usb5: SerialNumber: 0000:00:1d.7 [ 2.900384] ata_piix 0000:00:1f.2: version 2.12[ 2.900412] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19[ 2.900418] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.056043] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.056129] scsi0 : ata_piix [ 3.056368] scsi1 : ata_piix[ 3.057545] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 3.057549] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15[ 3.220489] ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101M, max UDMA/100[ 3.220493] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)[ 3.228492] ata1.00: configured for UDMA/100[ 3.392532] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33[ 3.408473] ata2.00: configured for UDMA/33[ 3.408577] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5 [ 3.410486] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 [ 3.410641] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.460449] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.463497] sdhci: SDHCI controller found at 0000:07:06.3 [104c: 803c] (rev 0) [ 3.463520] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18[ 3.463583] mmc0: SDHCI at 0xf0906800 irq 18 DMA[ 3.469833] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.496499] e100: eth0: e100_probe: addr 0xf0905000, irq 20, MAC addr 00:a0:d1:6b:b0:80[ 3.507737] Uniform Multi-Platform E-IDE driver[ 3.507742] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.540507] Driver 'sd' needs updating - please use bus_type methods [ 3.540617] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)[ 3.540639] sd 0:0:0:0: [sda] Write Protect is off [ 3.540642] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 3.540679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.540748] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)[ 3.540769] sd 0:0:0:0: [sda] Write Protect is off [ 3.540772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 3.540808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.540812] sda:<4>Driver 'sr' needs updating - please use bus_type methods[ 3.570844] sda1 sda2 < sda5 > [ 3.596552] sd 0:0:0:0: [sda] Attached SCSI disk[ 3.601558] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/ form2 cdda tray[ 3.601564] Uniform CD-ROM driver Revision: 3.20 [ 3.601659] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.620667] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.620690] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.830685] PM: Starting manual resume from disk [ 3.884335] kjournald starting. Commit interval 5 seconds [ 3.884335] EXT3-fs: mounted filesystem with ordered data mode. [ 5.579336] udevd version 125 started [ 6.590717] Linux agpgart interface v0.103 [ 6.596376] agpgart: Detected an Intel 945GM Chipset. [ 6.596580] agpgart: Detected 7932K stolen memory. [ 6.613988] agpgart: AGP aperture is 256M @ 0xd0000000[ 7.002940] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22[ 7.002970] PCI: Setting latency timer of device 0000:00:1b.0 to 64[ 7.038039] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...[ 7.080398] input: Power Button (FF) as /class/input/input1 [ 7.108723] ACPI: Power Button (FF) [PWRF] [ 7.108791] input: Lid Switch as /class/input/input2 [ 7.127173] ACPI: Lid Switch [LID] [ 7.127239] input: Power Button (CM) as /class/input/input3 [ 7.157830] ACPI: Power Button (CM) [PWRB] [ 7.198217] ACPI: AC Adapter [ADP0] (on-line) [ 7.332578] ACPI: Battery Slot [BAT0] (battery present) [ 7.871095] ACPI: device:04 is registered as cooling_device2 [ 7.871338] input: Video Bus as /class/input/input4[ 7.944379] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)[ 7.950850] ACPI: device:0a is registered as cooling_device3 [ 7.950966] input: Video Bus as /class/input/input5[ 7.984097] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.338039] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18[ 8.338055] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 8.338082] ath5k_pci 0000:05:00.0: registered as 'phy0' [ 8.516172] intel_rng: FWH not detected [ 8.679750] phy0: Selected rate control algorithm 'pid'[ 8.852610] ath5k phy0: Atheros AR2424 chip found (MAC: 0xa0, PHY: 0x61)[ 8.852961] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] [ 8.852987] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 8.852989] IO window: 0x00004400-0x000044ff [ 8.852995] IO window: 0x00004800-0x000048ff [ 8.853000] PREFETCH window: 0x34400000-0x347fffff [ 8.853006] MEM window: 0x30000000-0x33ffffff [ 8.853013] Yenta: Enabling burst memory read transactions [ 8.853019] Yenta: Using CSCINT to route CSC interrupts to PCI [ 8.853022] Yenta: Routing CardBus interrupts to PCI[ 8.853027] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66[ 9.084833] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 9.084838] Socket status: 30000006[ 9.084841] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b[ 9.084846] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 9.084849] cs: IO port probe 0x4000-0x4fff: clean.[ 9.085076] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff [ 9.085436] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 9.154315] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19[ 9.424092] input: PC Speaker as /class/input/input6[ 10.077511] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 [ 10.077519] synaptics: Toshiba Satellite Pro A100 detected, limiting rate to 40pps. [ 10.109426] input: SynPS/2 Synaptics TouchPad as /class/input/ input7[ 10.369947] cs: IO port probe 0x100-0x3af: clean. [ 10.372456] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 10.373248] cs: IO port probe 0x820-0x8ff: clean. [ 10.373938] cs: IO port probe 0xc00-0xcf7: clean. [ 10.374748] cs: IO port probe 0xa00-0xaff: clean.[ 11.102109] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k[ 11.452895] EXT3 FS on sda1, internal journal [ 11.693357] loop: module loaded [ 13.268628] NET: Registered protocol family 10 [ 13.269064] lo: Disabled Privacy Extensions [ 13.335482] ADDRCONF(NETDEV_UP): eth0: link is not ready[ 13.336137] e100: eth0: e100_watchdog: link up, 100Mbps, full- duplex[ 13.336796] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.752675] lp: driver loaded but no devices found [ 19.781447] ppdev: user-space parallel port driver [ 21.353823] RPC: Registered udp transport module. [ 21.353830] RPC: Registered tcp transport module.[ 21.407595] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 21.463280] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory[ 21.481139] NFSD: starting 90-second grace period [ 24.016022] eth0: no IPv6 routers present [ 24.566009] Bluetooth: Core ver 2.11 [ 24.598842] NET: Registered protocol family 31[ 24.598847] Bluetooth: HCI device and connection manager initialized[ 24.598851] Bluetooth: HCI socket layer initialized [ 24.669836] Bluetooth: L2CAP ver 2.9 [ 24.669842] Bluetooth: L2CAP socket layer initialized [ 24.845316] Bluetooth: RFCOMM socket layer initialized [ 24.845334] Bluetooth: RFCOMM TTY layer initialized [ 24.845337] Bluetooth: RFCOMM ver 1.8 [ 25.116226] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.532054] NET: Registered protocol family 5 [ 30.216083] [drm] Initialized drm 1.1.0 20060810[ 30.230316] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16[ 30.230326] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.230406] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 42.024024] eth0: no IPv6 routers present puter:/home/jon#...someone will have to tell me what this means. I've got no idea. Hope fully it might be informative.Cheers, JOn -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html
-- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html