[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
With CF VLC media player 2.2.2 Weatherwax (revision 2.2.2-0-g6259d80)[00000000008b8148] core libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
libdvdnav: Using dvdnav version 5.0.3 *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:571 *** *** for vmgi_mat->vmg_last_sector != 0 *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:573 *** *** for vmgi_mat->vmgi_last_sector * 2 <= vmgi_mat->vmg_last_sector *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:574 *** *** for vmgi_mat->vmgi_last_sector * 2 <= vmgi_mat->vmg_last_sector *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:587 ****** for vmgi_mat->vmgm_vobs == 0 || (vmgi_mat->vmgm_vobs > vmgi_mat->vmgi_last_sector && vmgi_mat->vmgm_vobs < vmgi_mat->vmg_last_sector) ***
libdvdread: Unable to read read TT_SRPT. libdvdnav: vm: ifoRead_TT_SRPT failed *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:571 *** *** for vmgi_mat->vmg_last_sector != 0 *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:573 *** *** for vmgi_mat->vmgi_last_sector * 2 <= vmgi_mat->vmg_last_sector *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:574 *** *** for vmgi_mat->vmgi_last_sector * 2 <= vmgi_mat->vmg_last_sector *** *** libdvdread: CHECK_VALUE failed in src/ifo_read.c:587 ****** for vmgi_mat->vmgm_vobs == 0 || (vmgi_mat->vmgm_vobs > vmgi_mat->vmgi_last_sector && vmgi_mat->vmgm_vobs < vmgi_mat->vmg_last_sector) ***
libdvdread: Unable to read read TT_SRPT. libdvdread: Invalid IFO for title 0 (VIDEO_TS.BUP). [00007f97300009b8] core input error: open of `dvd:///dev/sr0' failed QObject::~QObject: Timers cannot be stopped from another thread pentiddy@pentiddy:~$ dmesg | tail -n 100 [ 1492.307440] cfg80211: DFS Master region: unset[ 1492.307442] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1492.307446] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307449] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307452] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307455] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1492.307458] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1492.307461] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1492.307464] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307466] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1492.844000] PM: Syncing filesystems ... done. [ 1493.200069] PM: Preparing system for sleep (mem)[ 1493.200297] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1493.202353] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1493.203624] PM: Suspending system (mem) [ 1493.203645] Suspending console(s) (use no_console_suspend to debug) [ 1493.219864] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1493.302482] sd 0:0:0:0: [sda] Stopping disk [ 1493.892021] PM: suspend of devices complete after 687.143 msecs [ 1493.912396] PM: late suspend of devices complete after 20.335 msecs [ 1493.913684] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1493.928027] PM: noirq suspend of devices complete after 15.604 msecs [ 1493.928079] ACPI: Preparing to enter system sleep state S3 [ 1493.928509] ACPI : EC: EC stopped [ 1493.928510] PM: Saving platform NVS memory [ 1493.928543] Disabling non-boot CPUs ... [ 1493.928909] Broke affinity for irq 1 [ 1493.928919] Broke affinity for irq 9 [ 1493.928925] Broke affinity for irq 17 [ 1493.928931] Broke affinity for irq 32 [ 1493.928954] Broke affinity for irq 67 [ 1493.929007] Broke affinity for irq 261 [ 1493.929010] Broke affinity for irq 262 [ 1493.929013] Broke affinity for irq 264 [ 1493.930059] smpboot: CPU 1 is now offline [ 1493.940824] ACPI: Low-level resume complete [ 1493.940892] ACPI : EC: EC started [ 1493.940893] PM: Restoring platform NVS memory [ 1493.941449] Enabling non-boot CPUs ... [ 1493.961071] x86: Booting SMP configuration: [ 1493.961072] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1493.968277] cache: parent cpu1 should not be sleeping [ 1493.968439] CPU1 is up [ 1493.968679] ACPI: Waking up from system sleep state S3 [ 1494.089160] acpi LNXPOWER:00: Turning OFF [ 1494.105367] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1494.105692] PM: noirq resume of devices complete after 16.497 msecs [ 1494.180615] PM: early resume of devices complete after 74.705 msecs [ 1494.190349] ath: phy0: ASPM enabled: 0x42 [ 1494.193269] sd 0:0:0:0: [sda] Starting disk [ 1494.389908] rtc_cmos 00:00: System wakeup disabled by ACPI [ 1494.405651] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [ 1494.521727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1494.524072] ata2.00: configured for UDMA/100 [ 1494.646139] usb 1-4: reset high-speed USB device number 3 using xhci_hcd[ 1494.846421] usb 1-2.2: reset full-speed USB device number 6 using xhci_hcd [ 1494.934836] usb 1-2.2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 1495.403199] usb 1-2.2.1: reset low-speed USB device number 7 using xhci_hcd [ 1495.681021] usb 1-2.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1495.940006] usb 1-2.2.3: reset low-speed USB device number 8 using xhci_hcd [ 1496.219111] usb 1-2.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1496.219118] usb 1-2.2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1496.226062] PM: resume of devices complete after 2042.649 msecs [ 1496.226514] PM: Finishing wakeup. [ 1496.226517] Restarting tasks ... done. [ 1496.372143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1496.522533] ata1.00: configured for UDMA/133 [ 1496.629666] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1496.664797] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1496.670307] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1496.716411] r8169 0000:01:00.0 enp1s0: link down [ 1496.717063] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1496.797379] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready[ 1504.536144] usb 1-2.2.1: reset low-speed USB device number 7 using xhci_hcd [ 1504.814719] usb 1-2.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1505.072593] usb 1-2.2.3: reset low-speed USB device number 8 using xhci_hcd [ 1505.352434] usb 1-2.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1505.352454] usb 1-2.2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1842.421386] UDF-fs: INFO Mounting volume 'DVDVolume', timestamp 2036/02/07 10:58 (1000)
[ 1890.684602] VFS: busy inodes on changed media or resized disk sr0 [ 1901.649884] VFS: busy inodes on changed media or resized disk sr0 [ 2148.641695] VFS: busy inodes on changed media or resized disk sr0 [ 2175.523741] VFS: busy inodes on changed media or resized disk sr0[ 2176.808644] sr 1:0:0:0: [sr0] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2176.808653] sr 1:0:0:0: [sr0] tag#22 Sense Key : Illegal Request [current] [ 2176.808659] sr 1:0:0:0: [sr0] tag#22 Add. Sense: Logical block address out of range [ 2176.808668] sr 1:0:0:0: [sr0] tag#22 CDB: Read(10) 28 00 00 3b ec de 00 00 02 00
[ 2176.808672] blk_update_request: I/O error, dev sr0, sector 15709048[ 2176.816760] sr 1:0:0:0: [sr0] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2176.816770] sr 1:0:0:0: [sr0] tag#23 Sense Key : Illegal Request [current] [ 2176.816776] sr 1:0:0:0: [sr0] tag#23 Add. Sense: Logical block address out of range [ 2176.816783] sr 1:0:0:0: [sr0] tag#23 CDB: Read(10) 28 00 00 3b ec de 00 00 01 00
[ 2176.816787] blk_update_request: I/O error, dev sr0, sector 15709048[ 2176.816793] Buffer I/O error on dev sr0, logical block 3927262, async page read [ 2176.824660] sr 1:0:0:0: [sr0] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2176.824667] sr 1:0:0:0: [sr0] tag#25 Sense Key : Illegal Request [current] [ 2176.824672] sr 1:0:0:0: [sr0] tag#25 Add. Sense: Logical block address out of range [ 2176.824678] sr 1:0:0:0: [sr0] tag#25 CDB: Read(10) 28 00 00 3b ec df 00 00 01 00
[ 2176.824682] blk_update_request: I/O error, dev sr0, sector 15709052[ 2176.824687] Buffer I/O error on dev sr0, logical block 3927263, async page read
The reason you saw two drives is as you suspect- I tried with both the internal (sr0) and the external usb drive (SR1)
I am running 64bit system.Hope this makes sense to you- it doesn't look like 'fun' reading but I remember getting into BBC Basic programming when I was at school, and I guess if you know what you are looking at you can decipher it!
Thanks for your effort on my behalf.Also big thanks to James Kilty for the links to Netflix solutions- successful watch of Ghost with my Wife and Kids last night- is it really 27 years old!?
;-) Cheers Anthony -- The Mailing List for the Devon & Cornwall LUG https://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/listfaq