[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
|
Ok here goes... Acer Aspire E5-411-C5Z7 Lspci gives the following; lspci 00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e) 00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e) 00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e) 00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e) 00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e) 00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e) 00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e) 00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e) 00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e) 00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) I chose an old film to show the drive works - Highlander and the results of dmesg | tail -n 100 [Â 725.198508] wlp2s0: associated [Â 725.198571] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [Â 725.205398] ath: EEPROM regdomain: 0x833a [Â 725.205404] ath: EEPROM indicates we should expect a country code [Â 725.205406] ath: doing EEPROM country->regdmn map search [Â 725.205408] ath: country maps to regdmn code: 0x37 [Â 725.205411] ath: Country alpha2 being used: GB [Â 725.205412] ath: Regpair used: 0x37 [Â 725.205415] ath: regdomain 0x833a dynamically updated by country IE [Â 725.205436] cfg80211: Regulatory domain changed to country: GB [Â 725.205438] cfg80211:Â DFS Master region: ETSI [Â 725.205440] cfg80211:ÂÂ (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [Â 725.205444] cfg80211:ÂÂ (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [Â 725.205447] cfg80211:ÂÂ (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [Â 725.205450] cfg80211:ÂÂ (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [Â 725.205453] cfg80211:ÂÂ (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [Â 725.205456] cfg80211:ÂÂ (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 1492.288608] wlp2s0: deauthenticating from 00:17:3f:17:ea:21 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1492.307433] cfg80211: World regulatory domain updated: [ 1492.307440] cfg80211:Â DFS Master region: unset [ 1492.307442] cfg80211:ÂÂ (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1492.307446] cfg80211:ÂÂ (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307449] cfg80211:ÂÂ (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307452] cfg80211:ÂÂ (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307455] cfg80211:ÂÂ (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1492.307458] cfg80211:ÂÂ (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1492.307461] cfg80211:ÂÂ (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1492.307464] cfg80211:ÂÂ (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1492.307466] cfg80211:ÂÂ (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1492.844000] PM: Syncing filesystems ... done. [ 1493.200069] PM: Preparing system for sleep (mem) [ 1493.200297] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1493.202353] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1493.203624] PM: Suspending system (mem) [ 1493.203645] Suspending console(s) (use no_console_suspend to debug) [ 1493.219864] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1493.302482] sd 0:0:0:0: [sda] Stopping disk [ 1493.892021] PM: suspend of devices complete after 687.143 msecs [ 1493.912396] PM: late suspend of devices complete after 20.335 msecs [ 1493.913684] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1493.928027] PM: noirq suspend of devices complete after 15.604 msecs [ 1493.928079] ACPI: Preparing to enter system sleep state S3 [ 1493.928509] ACPI : EC: EC stopped [ 1493.928510] PM: Saving platform NVS memory [ 1493.928543] Disabling non-boot CPUs ... [ 1493.928909] Broke affinity for irq 1 [ 1493.928919] Broke affinity for irq 9 [ 1493.928925] Broke affinity for irq 17 [ 1493.928931] Broke affinity for irq 32 [ 1493.928954] Broke affinity for irq 67 [ 1493.929007] Broke affinity for irq 261 [ 1493.929010] Broke affinity for irq 262 [ 1493.929013] Broke affinity for irq 264 [ 1493.930059] smpboot: CPU 1 is now offline [ 1493.940824] ACPI: Low-level resume complete [ 1493.940892] ACPI : EC: EC started [ 1493.940893] PM: Restoring platform NVS memory [ 1493.941449] Enabling non-boot CPUs ... [ 1493.961071] x86: Booting SMP configuration: [ 1493.961072] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1493.968277]Â cache: parent cpu1 should not be sleeping [ 1493.968439] CPU1 is up [ 1493.968679] ACPI: Waking up from system sleep state S3 [ 1494.089160] acpi LNXPOWER:00: Turning OFF [ 1494.105367] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1494.105692] PM: noirq resume of devices complete after 16.497 msecs [ 1494.180615] PM: early resume of devices complete after 74.705 msecs [ 1494.190349] ath: phy0: ASPM enabled: 0x42 [ 1494.193269] sd 0:0:0:0: [sda] Starting disk [ 1494.389908] rtc_cmos 00:00: System wakeup disabled by ACPI [ 1494.405651] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [ 1494.521727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1494.524072] ata2.00: configured for UDMA/100 [ 1494.646139] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 1494.846421] usb 1-2.2: reset full-speed USB device number 6 using xhci_hcd [ 1494.934836] usb 1-2.2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 1495.403199] usb 1-2.2.1: reset low-speed USB device number 7 using xhci_hcd [ 1495.681021] usb 1-2.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1495.940006] usb 1-2.2.3: reset low-speed USB device number 8 using xhci_hcd [ 1496.219111] usb 1-2.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1496.219118] usb 1-2.2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1496.226062] PM: resume of devices complete after 2042.649 msecs [ 1496.226514] PM: Finishing wakeup. [ 1496.226517] Restarting tasks ... done. [ 1496.372143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1496.522533] ata1.00: configured for UDMA/133 [ 1496.629666] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1496.664797] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1496.670307] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1496.716411] r8169 0000:01:00.0 enp1s0: link down [ 1496.717063] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1496.797379] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1504.536144] usb 1-2.2.1: reset low-speed USB device number 7 using xhci_hcd [ 1504.814719] usb 1-2.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1505.072593] usb 1-2.2.3: reset low-speed USB device number 8 using xhci_hcd [ 1505.352434] usb 1-2.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1505.352454] usb 1-2.2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1842.421386] UDF-fs: INFO Mounting volume 'DVDVolume', timestamp 2036/02/07 10:58 (1000) [ 1890.684602] VFS: busy inodes on changed media or resized disk sr0 [ 1901.649884] VFS: busy inodes on changed media or resized disk sr0 Â The next post is with with Captain Fantastic... |
-- The Mailing List for the Devon & Cornwall LUG https://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/listfaq
