D&C GLug - Home Page

[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]

Re: [LUG] 3 mobile wvdial.conf woes...

 



On Thu, Jan 8, 2009 at 2:59 PM, Grant Sewell <dcglug@xxxxxxxxxxxx> wrote:
Hi all,

After looking around at various data plan, etc, I decided I would go for
Three's "Broadband Lite" package for my phone.

I am trying to get both USB and Bluetooth connections working.

Currently I have /dev/rfcomm0 up and running, and my wvdial.conf is as such:

[Dialer Defaults]
Init1=ATZ
Init2=ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3=AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0
modem=/dev/rfcomm0
Baud=460800
Modem Type=Analog Modem
ISDN=0
Phone = *99#
Username = user
Password = passwd
New PPPD = yes
Stupid Mode = 1

Now, when I try "wvdial" from the commandline (as root), I get:

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0
AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Thu Jan 8 14:56:12 2009
--> Pid of pppd: 8727
--> Using interface ppp0
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> pppd: ا[06][08][18]�[06][08][08]�[06][08]
--> Disconnecting at Thu Jan 8 14:56:16 2009
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd
man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Cannot open /dev/rfcomm0: Input/output error
--> Cannot get information for serial port.

I get the same thing when I try with /dev/ttyACM0 (ie my phone's USB
connection).

Any thoughts?
Grant. :)

--
The Mailing List for the Devon & Cornwall LUG
http://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html



Not sure if this has anything to do with it but the APN you might want to use is "3internet", at least, that's the APN my dongle defaults to.

Shaun
-- 
The Mailing List for the Devon & Cornwall LUG
http://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html