D&C Lug - Home Page
Devon & Cornwall Linux Users' Group

[ Date Index ][ Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]

[LUG] DVD burning problems



ARGHH! Another DVD coaster! >:-(

Despite having managed to successfully create two DVDs, one of which was using exactly the same media, I am now completely unable to burn any DVDs. It works fine in dummy mode, but when I actually try writing the disc, I get:

"Performing OPC...

dvdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)"

Any ideas?

Cheers,

Jon

---------------
The Full Story:

*mkisofs -graft-points -o /share/tmp/burner.iso -J -l -r -V
'test'
\/=\/share\/music\/wav\/radiohead\/ok_computer\/track01\.cdda\.flac ..*

28.60% done, estimate finish Sat Mar 20 13:19:39 2004
57.22% done, estimate finish Sat Mar 20 13:19:40 2004
85.73% done, estimate finish Sat Mar 20 13:19:40 2004
Total translation table size: 0
Total rockridge attributes bytes: 258
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 21644

17504 extents written (34 Mb)



*dvdrecord -v dev=0,1,0 speed=16 -eject -dao '/share/tmp/burner.iso' ..*

scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c  
      1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero@xxxxxxxxxxxx>
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'bero-0.5a'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities : Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-105 '
Revision : '1.21'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 34 MB Total size: 39 MB (03:53.38) = 17504 sectors
Lout start: 39 MB (03:55/29) = 17504 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2280992


Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
dvdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0E 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid) cmd finished after 1.183s timeout 200s
dvdrecord: OPC failed.
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.





-- The Mailing List for the Devon & Cornwall LUG Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the message body to unsubscribe.


Lynx friendly