D&C GLug - Home Page

[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]

Re: [LUG] Merry Christmas All.. automount problem with kernel 41.3 on Mint 18.3

 
Thanks Simon.

This is the dmesg output before and after manually mounting the shares; as you can see there is no change. I assume I need to look in a different log? It looks as though the network is up which is one issue the forums suggested; if it wasn't I wouldn't get any network activity and I do.

Julian

julian@Cerce ~ $ dmesg | tail
[ÂÂ 17.232071] tda1004x: timeout waiting for DSP ready
[ÂÂ 17.292072] tda1004x: found firmware revision 0 -- invalid
[ÂÂ 17.292076] tda1004x: waiting for firmware upload...
[ÂÂ 17.294592] saa7134 0000:01:0a.0: Direct firmware load for dvb-fe-tda10046.fw failed with error -2
[ÂÂ 17.294783] saa7134 0000:01:0a.0: Direct firmware load for dvb-fe-tda10045.fw failed with error -2
[ÂÂ 17.294787] tda1004x: no firmware upload (timeout or file not found?)
[ÂÂ 17.294795] tda1004x: firmware upload failed
[ÂÂ 25.313701] forcedeth 0000:00:0a.0 enp0s10: link up
[ÂÂ 25.314190] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s10: link becomes ready
[Â 317.944345] usb 2-1: reset high-speed USB device number 2 using ehci-pci
julian@Cerce ~ $ sudo mount -a
[sudo] password for julian:
julian@Cerce ~ $ dmesg | tail
[ÂÂ 17.232071] tda1004x: timeout waiting for DSP ready
[ÂÂ 17.292072] tda1004x: found firmware revision 0 -- invalid
[ÂÂ 17.292076] tda1004x: waiting for firmware upload...
[ÂÂ 17.294592] saa7134 0000:01:0a.0: Direct firmware load for dvb-fe-tda10046.fw failed with error -2
[ÂÂ 17.294783] saa7134 0000:01:0a.0: Direct firmware load for dvb-fe-tda10045.fw failed with error -2
[ÂÂ 17.294787] tda1004x: no firmware upload (timeout or file not found?)
[ÂÂ 17.294795] tda1004x: firmware upload failed
[ÂÂ 25.313701] forcedeth 0000:00:0a.0 enp0s10: link up
[ÂÂ 25.314190] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s10: link becomes ready
[Â 317.944345] usb 2-1: reset high-speed USB device number 2 using ehci-pci
julian@Cerce ~ $

Kind regards,

Julian

On 24/12/17 16:10, Simon Avery wrote:
Merry Christmas at you too!

What do the logs say when you try to mount them manually?

S

On 24 December 2017 at 14:29, Julian Hall <linux@xxxxxxxxxxxx> wrote:
Thanks Stephen.. this is not on my laptop but the warning is well-timed as my laptop actually /is/ a Lenovo..


On 24/12/17 12:37, Stephen Amor wrote:
I hope it's nothing to do with this:

https://www.phoronix.com/scan.php?page=news_item&px=Ubuntu-17.10-BIOS-Corrupter

:-(




On Sunday, 24 December 2017, 12:28, Julian Hall <linux@xxxxxxxxxxxx> wrote:


Hi All,

Merry Christmas everyone!

I've just updated the kernel from 4.11.* to 4.13.* and immediately it's
refused to automount my NAS shares which previously worked perfectly.

# automount CASSIOPEIA on NAS
192.168.1.3:/volume1/CASSIOPEIA /media/julian/CASSIOPEIA nfs
# automount DIANA on NAS
192.168.1.3:/volume1/DIANA /media/julian/DIANA nfs
# automount PERSEPHONE on NAS
192.168.1.3:/volume1/PERSEPHONE /media/julian/PERSEPHONE nfs

As you can see they're pretty basic and they mount manually with sudo
mount -a. Any suggestions please?

Kind regards,

Julian

--
The Mailing List for the Devon & Cornwall LUG






--
The Mailing List for the Devon & Cornwall LUG
https://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/listfaq





-- 
The Mailing List for the Devon & Cornwall LUG
https://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/listfaq