[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
On 9 November 2012 09:54, tom <tompotts@xxxxxxxxxxxxxxxxxxxxxx> wrote: > Someone recently mentioned the http://www.raspberrypi.org/archives/2129 > brewery controller. > The temperature sensors are +/- 0.5 C which isn’t accurate enough for my > liking. Does anyone know of better ones? The linked article says 0.1 degree resolution but clicking through they are using a DS18B20 with an absolute accuracy of +/-0.5 so are you after absolute accuracy better than 0.5 degree or better resolution? The best accuracy you are going to get is via a PT100 (RTD) but you will need some extra circuitry to drive one. There is a nice chip from analog devices that interfaces PT100s and you can just bit bang the serial interface via the GPIO on the pi, but i expect you are not going to find a 3 wire device such as the DS18B20 that just works with better accuracy. Robin -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/listfaq