D&C GLug - Home Page

[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]

[LUG] pfSense

 

Anyone out there with pfSense experience? I'm good at IPCop but I'm having trouble getting inbound data on a red/green/orange config on a pfSense box. An old IPCop box has broken and I've replaced it with a natty little box with pfSense pre-installed - same cabling etc, just a different box.

My set up is

internet -> router (DMZ pass-through and firewall disabled) [10.0.0.1] -> [10.0.0.2] "red" port on pfsense
web server [192.168.2.2]-> [192.168.2.1] "orange" port on pfsense.
LAN [192.168.1.0]-> [192.168.1.1] "green" port on pfsense.

Outbound on green and orange works fine. The pfsense webgui can be seen from green and orange but not when connected to one of the router ports (ie. 10.0.0.10 trying to get in via "red").

With various fiddling it seems that the router is happily squirting packets out of 10.0.0.1 but they're either not arriving at 10.0.0.2 (unlikely, single cable, fully tested) or they are arriving at 10.0.0.2 and the pfsense box is throwing them away for some reason.

I "think" my pfsense NAT and firewall settings correct but there's obviously something wrong somewhere....

Regs
Martin
-- 
The Mailing List for the Devon & Cornwall LUG
http://mailman.dclug.org.uk/listinfo/list
FAQ: http://www.dcglug.org.uk/listfaq