[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
Hi, I'm currently messing around with trying to get this card working but not to much avail. I have these modules loaded: http://sagittatechnologies.org/lsmod.txt I think its almost working because /dev/dvb/adaptor0 exists and kaffeine shows the name of the card and starts the tuning sequence. I have found the scan thingy for Stocklandhill and added to ~/.kde/share/apps/kaffeine/dbv-t/ (this is the line if it helps T 374000000 8MHz 3/4 NONE QAM16 2K 1/32 NONE) Still setting my transmitter as this and pressing scan makes no results there is just SNR at 50% no matter what even if I unplug the ariel. I have tried this also with CrystalPalace as i know that worked for someone. Also i have tried using dvbscan and the same files but I get back the error: "scanning /home/tom/uk-StocklandHill using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ERROR: invalid enum value '2K' initial transponder 374000000 0 3 9 1 2 0 0 >>> tune to: 374000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 374000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done." Any help greatfully accepted. TIA -- Tom (the younger) -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html