D&C Lug - Home Page
Devon & Cornwall Linux Users' Group

[ Date Index ][ Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]

Re: [LUG] Three Questions :)




On 11/06/04 16:10:42, Julian Hall wrote:
Third issue.  Bit of a naughty one.  Origo BRP 1400 router with
built-in
USB Print server.  I had a look on Google for this one.  All I could
find was someone else asking the same question and the less than
helpful
response "You'll have to configure it yourself, the software only
works
in Windows!"  About as much use as a cat-flap in an elephant house.

Not sure why it is naughty!


Also not sure what you are trying to configure? Printer port or network.

I would have thought you should be able to configure it using a windows PC then just use linux, of course the router could download config off the PC in which case you would need to work that out.

Worst case is that it is like a winmodem and needs windows OS to do work for it.

How does it plug in? What sort of connectors are there on it?

--
'ooroo

Mike...(:)-)
---------------------------------------------------
Email: mike@xxxxxxxxxxxxx        o
You need only two tools.        o /////
A hammer and duct tape. If it    /@   `\  /) ~
doesn't move and it should use  >  (O)  X<  ~  Fish!!
the hammer. If it moves and      `\___/'  \) ~
shouldn't, use the tape.           \\\
---------------------------------------------------

--
The Mailing List for the Devon & Cornwall LUG
Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the
message body to unsubscribe.



Lynx friendly