Re: [LUG] Newbie in trouble with X

To: <lug-list at area51.termisoc.org>
Subject: Re: [LUG] Newbie in trouble with X
From: "Kelly Jones" <kj at kellyjones.worldonline.co.uk>
Date: Fri, 26 Jan 2001 01:40:04 -0000
References: <20010125202645.22672.qmail at web3904.mail.yahoo.com>
Reply-To: lug-list at area51.termisoc.org
Sender: owner-lug-list at area51.termisoc.org
it seems that from the error messages, x is not configured correctly, with
this distro i think the command xdrake or Xdrake from a terminal will get
the configuration program running.
I assume you have all the necessary details of your hardware etc, if not can
you boot into windoze to obtain the necessary information

----- Original Message -----
From: "Trevor Sansom" <trevor_sansom_uk at yahoo.co.uk>
To: "LUG Devon Cornwall" <lug-list at area51.termisoc.org>
Sent: Thursday, January 25, 2001 8:26 PM
Subject: [LUG] Newbie in trouble with X


> I was feeling very self satisfied, having finally got
> onto the net with my external modem and Mandrake 7.2.
> Soon deflated though after system locked up and needed
> power-off to restart. Now I can't get KDE running even
> after trying a install update (didn't do full
> reinstall as original took 15 hours!) Please assist.
> How can you configure X from text based installation
> as XF86Setup does not seem available?
>
> The XFree86 log follows:-
>
>
> XFree86 Version 4.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6400)
> Release Date: 1 July 2000
> If the server is older than 6-12 months, or if your
> card is newer
> than the above date, look for a newer version before
> reporting
> problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.17-15mdksmp i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan
> 25 20:02:33 2001
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==)
> default setting,
>          (++) from command line, (!!) notice, (II)
> informational,
>          (WW) warning, (EE) error, (??) unknown.
> (==) ServerLayout "layout1"
> (**) |-->Screen "screen1" (0)
> (**) |   |-->Monitor "Generic|High Frequency SVGA,
> 1024x768 at 70 Hz"
> (**) |   |-->Device "SiS 5597"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "250 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc105"
> (**) XKB: model: "pc105"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (**) FontPath set to "unix/:-1"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (**) Option "AllowMouseOpenFail"
> (--) using VT number 7
>
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.2
> XFree86 XInput driver : 0.1
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.1
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.1
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.2
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x80000074,
> mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1039,5597 card 0000,0000 rev
> 02 class 06,00,00 hdr 00
> (II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev
> 01 class 06,01,00 hdr 80
> (II) PCI: 00:01:1: chip 1039,5513 card 0000,0000 rev
> d0 class 01,01,8a hdr 80
> (II) PCI: 00:0d:0: chip 5333,8a01 card 5333,8a01 rev
> 01 class 03,00,00 hdr 00
> (II) PCI: 00:0f:0: chip 14f1,1034 card 144f,1016 rev
> 08 class 07,80,00 hdr 00
> (II) PCI: 00:11:0: chip 4005,4000 card 4005,4000 rev
> 00 class 04,01,00 hdr 00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.2
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(0:13:0) S3 ViRGE/DX or /GX rev 1, Mem  at 
> 0xe0000000/26
> (II) Addressable bus resource ranges are
> [0] -1 0x00000000 - 0xffffffff (0x0) MXB
> [1] -1 0x00000000 - 0x0000ffff (0x10000) IXB
> (II) OS-reported resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB
> [3] -1 0x000c0000 - 0x000effff (0x30000) MXB
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
> [5] -1 0x00000000 - 0x000001ff (0x200) IXBE
> (II) Active PCI resource ranges:
> [0] -1 0xe4000000 - 0xe7ffffff (0x4000000) MXBE
> [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXB(B)
> [2] -1 0x00006400 - 0x000064ff (0x100) IXBE
> [3] -1 0x00006300 - 0x000063ff (0x100) IXBE
> [4] -1 0x00004000 - 0x000040ff (0x100) IXBE
> [5] -1 0x00000374 - 0x00000377 (0x4) IXBE
> [6] -1 0x00000170 - 0x0000017f (0x10) IXBE
> [7] -1 0x000003f4 - 0x000003f7 (0x4) IXBE
> [8] -1 0x000001f0 - 0x000001ff (0x10) IXBE
> (II) Active PCI resource ranges after removing
> overlaps:
> [0] -1 0xe4000000 - 0xe7ffffff (0x4000000) MXBE
> [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXB(B)
> [2] -1 0x00006400 - 0x000064ff (0x100) IXBE
> [3] -1 0x00006300 - 0x000063ff (0x100) IXBE
> [4] -1 0x00004000 - 0x000040ff (0x100) IXBE
> [5] -1 0x00000374 - 0x00000377 (0x4) IXBE
> [6] -1 0x00000170 - 0x0000017f (0x10) IXBE
> [7] -1 0x000003f4 - 0x000003f7 (0x4) IXBE
> [8] -1 0x000001f0 - 0x000001ff (0x10) IXBE
> (II) OS-reported resource ranges after removing
> overlaps with PCI:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB
> [3] -1 0x000c0000 - 0x000effff (0x30000) MXB
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
> [5] -1 0x00000000 - 0x0000016f (0x170) IXBE
> (II) All system resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB
> [3] -1 0x000c0000 - 0x000effff (0x30000) MXB
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
> [5] -1 0xe4000000 - 0xe7ffffff (0x4000000) MXBE
> [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXB(B)
> [7] -1 0x00000000 - 0x0000016f (0x170) IXBE
> [8] -1 0x00006400 - 0x000064ff (0x100) IXBE
> [9] -1 0x00006300 - 0x000063ff (0x100) IXBE
> [10] -1 0x00004000 - 0x000040ff (0x100) IXBE
> [11] -1 0x00000374 - 0x00000377 (0x4) IXBE
> [12] -1 0x00000170 - 0x0000017f (0x10) IXBE
> [13] -1 0x000003f4 - 0x000003f7 (0x4) IXBE
> [14] -1 0x000001f0 - 0x000001ff (0x10) IXBE
> (II) LoadModule: "dbe"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.1
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "freetype"
> (II) Loading
> /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.1.7
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.1
> (II) Loading font FreeType
> (II) LoadModule: "sis"
> (II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
> (II) Module sis: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 0.6.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.2
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.0.1, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.1
> (II) SIS: driver for SiS chipsets: SIS5597, SIS5598,
> SIS530, SIS6326,
> SIS300, SIS630, SIS540
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> When reporting a problem related to a server crash,
> please send
> the full server output, not just the last messages.
> This can be found in the log file
> "/var/log/XFree86.0.log".
>
>
>
> ____________________________________________________________
> Do You Yahoo!?
> Get your free  at yahoo.co.uk address at http://mail.yahoo.co.uk
> or your free  at yahoo.ie address at http://mail.yahoo.ie
> --
> lug-list - The Mailing List for the Devon & Cornwall LUG
> Mail majordomo at lists.termisoc.org with "unsubscribe lug-list" in the
> message body to unsubscribe.

--
lug-list - The Mailing List for the Devon & Cornwall LUG
Mail majordomo at lists.termisoc.org with "unsubscribe lug-list" in the
message body to unsubscribe.
References:
- [LUG] Newbie in trouble with X
  - From: Trevor Sansom <trevor_sansom_uk at yahoo.co.uk>
Prev by Date: [LUG] Newbie in trouble with X
Next by Date: [LUG] Noisy Bash
Prev by thread: [LUG] Newbie in trouble with X
Next by thread: [LUG] Noisy Bash
Index(es):
- Date
- Thread
Lynx friendly