[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[LUG] Boot messages2
Last week I queried some of my boot messages when
loading Mandrake 7.2. Several offers of help were
received but required more information. To this end I
have now listed the boot log in full:-
######### Wed Jan 3 00:15:23 2001
<4>Linux version 2.2.17-21mdk
(chmou at no.mandrakesoft.com) (gcc version 2.95.3
19991030 (prerelease)) #1 Thu Oct 5 13:16:08 CEST 2000
<4>Detected 200454 kHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 399.77 BogoMIPS
<4>Memory: 30344k/32768k available (1136k kernel code,
416k reserved, 744k data, 128k init, 0k bigmem)
<4>Dentry hash table entries: 4096 (order 3, 32k)
<4>Buffer cache hash table entries: 32768 (order 5,
128k)
<4>Page cache hash table entries: 8192 (order 3, 32k)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: Intel Pentium MMX stepping 03
<6>Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<6>Intel Pentium with F0 0F bug - workaround enabled.
<4>POSIX conformance testing by UNIFIX
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb440, last
bus=0
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society
NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>TCP: Hash tables configured (ehash 32768 bhash
32768)
<4>Initializing RT netlink socket
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<6>Serial driver version 4.27 with MANY_PORTS
MULTIPORT SHARE_IRQ enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>pty: 256 Unix98 ptys configured
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version
1.13)
<6>Real Time Clock Driver v1.09
<4>RAM disk driver initialized: 16 RAM disks of 4096K
size
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30
<4>ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
<4>SIS5513: IDE controller on PCI bus 00 dev 09
<4>SIS5513: chipset revision 208
<4>SIS5513: not 100% native mode: will probe irqs
later
<4>SiS5597
<4> ide0: BM-DMA at 0x4000-0x4007, BIOS settings:
hda:pio, hdb:pio
<4> ide1: BM-DMA at 0x4008-0x400f, BIOS settings:
hdc:pio, hdd:pio
<4>hda: ST32122A, ATA DISK drive
<4>hdb: FXN01DE, ATAPI CDROM drive
<4>hdc: Maxtor 91360U4, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: ST32122A, 2014MB w/128kB Cache,
CHS=1023/64/63, UDMA(33)
<6>hdc: Maxtor 91360U4, 12982MB w/2048kB Cache,
CHS=26377/16/63, UDMA(33)
<4>hdb: ATAPI 2X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.11
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
<6>raid5: measuring checksumming speed
<6>raid5: MMX detected, trying high-speed MMX checksum
routines
<4> pII_mmx : 306.705 MB/sec
<4> p5_mmx : 359.283 MB/sec
<4> 8regs : 216.789 MB/sec
<4> 32regs : 171.831 MB/sec
<4>using fastest function: p5_mmx (359.283 MB/sec)
<4>scsi : 0 hosts.
<4>scsi : detected total.
<4>md.c: sizeof(mdp_super_t) = 4096
<4>Partition check:
<4> hda: hda1 hda2 hda3
<4> hdc:hdc: timeout waiting for DMA
<4>ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
<4>hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
<4>hdc: timeout waiting for DMA
<4>ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
<4>hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
<4>hdc: timeout waiting for DMA
<4>ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
<4>hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
<4>hdc: timeout waiting for DMA
<4>ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
<4>hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
<4>hdc: DMA disabled
<4>ide1: reset: success
<4> [PTBL] [1027/255/63] hdc1 < hdc5 hdc6 hdc7 hdc8
hdc9 hdc10 >
<6>autodetecting RAID arrays
<4>autorun ...
<4>... autorun DONE.
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 128k freed
<6>Adding Swap: 66524k swap-space (priority -1)
As before any further help would be very appreciated.
Trevor Sansom
____________________________________________________________
Do You Yahoo!?
Get your free at yahoo.co.uk address at http://mail.yahoo.co.uk
or your free at yahoo.ie address at http://mail.yahoo.ie
--
lug-list - The Mailing List for the Devon & Cornwall LUG
Mail majordomo at lists.termisoc.org with "unsubscribe lug-list" in the
message body to unsubscribe.
