D&C Lug - Home Page
Devon & Cornwall Linux Users' Group

[ Date Index ][ Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]

[LUG] ip address



Hi !, I'm back with this one again. We've worked out that my eth0 card isnt 
configured ( which should have been obvious to me due to the red FAILED 
warning on boot up...oops ) properly, thanks for the help so far, but on 
trying to configure it I'm stuck when asked for my ip address.  Is this just 
a case of getting a provider who asigns static rather than dynamic addresses 
?. 
    I've already contacten anlx as I'm suspecting this is the case but it'd be 
nice to know for sure........(says I; hoping Theo's reading)
Jon Davey

D&C Lug - Home Page
Devon & Cornwall Linux Users Group - Since October 1999

[ Date Index ][ Thread Index ]
[ Previous (date) <=> (thread) ] [ Next (date) <=> (thread) ]
Re: [LUG] ip address

    * To: list@xxxxxxxxxxxx
    * Subject: Re: [LUG] ip address
    * From: jon davey <jondavey@xxxxxxxxxxxxxx>
    * Date: Sat, 22 Mar 2003 00:24:38 +0000
    * Reply-to: list@xxxxxxxxxxxx

On Saturday 22 Mar 2003 12:00 am, Neil Williams wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> On Friday 21 Mar 2003 10:59 pm, jon davey wrote:
> > Hi. I've cheked man ip ehere it sugested looking for
> > usr/share/dbc/iproute......................and looked for
> Doesn't appear on my Mandrake9.
Oh.....?
> > usr/share/dbc/iproute-2.4.7/ip-cref.ps which did'nt appear to exist,
> > possibly due to my install selections.......but I'm none the wiser in
> > working out what the ip address is of my computer. I've also tried
> > pinging localhost(127.0.0.1) which replied with 127.0.0.1 repetedly and
> > tried looking in etc/resolv.conf
> ifconfig (as root)
> eth0      Link encap:Ethernet  HWaddr 00:20:78:1A:4E:55
>           inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
> >   I need to know this as I'm trying to set up a LAN here at home.
   If all you get is:
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
> then your network card is not fully configured or possibly isn't being
> recognised. Post again with more info if that's the case.
> Neil Williams
I got this  --->
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12040 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12040 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1006708 (983.1 Kb)  TX bytes:1006708 (983.1 Kb)
which, I guess means my eithernet card is'nt configured......



--
The Mailing List for the Devon & Cornwall LUG
Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the
message body to unsubscribe.


    * References:
          o [LUG] ip address
          + From: jon davey
          o Re: [LUG] ip address
          + From: Neil Williams

    * Prev by Date: Re: [LUG] ip address
    * Next by Date: Fwd: Re: [LUG] ip address
    * Previous by thread: Re: [LUG] ip address
    * Next by thread: Fwd: Re: [LUG] ip address
    * Index(es):
          o Date
          o Thread

Lynx & Konqueror v2 friendly


--
The Mailing List for the Devon & Cornwall LUG
Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the
message body to unsubscribe.


Lynx friendly