[ Date Index ][
Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]
Quoting John Horne <J.Horne@xxxxxxxxxxxxxx>:
>
> One other suggestion was the 'mii-tool' command. However this works with
> 100/10Mbps capable cards, which mine isn't.
On the 3com website or the driver discs there is a DOS program
called '3c5x9cfg' which allows you to program the card (they are jumperless).
This will also give you information (iirc) about duplex. We have hundreds of
these cards and i used this config program last year to write some boot scripts
for them.
Adam Scott
Network Manager
Pool School & Community College
-----------------------------------------------------
Pool School & Community College ICT Department
The school does not accept responsibility for the
content of messages sent from this system. Misuse
of the service should be reported to...
postmaster@xxxxxxxxxxxxxxxxxxxx
http://www.pool.cornwall.sch.uk
--
The Mailing List for the Devon & Cornwall LUG
Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the
message body to unsubscribe.