[ Date Index ][
Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]
Re: [LUG] Installing drivers
Neil
Thanks for your comprehensive reply. Here are two logs :-
[root@xxxxxxxxx master]# /sbin/modprobe emu10k1
/lib/modules/2.4.20-6/kernel/drivers/sound/emu10k1/emu10k1.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-6/kernel/drivers/sound/emu10k1/emu10k1.o: insmod /lib/modules/2.4.20-6/kernel/drivers/sound/emu10k1/emu10k1.o failed
/lib/modules/2.4.20-6/kernel/drivers/sound/emu10k1/emu10k1.o: insmod emu10k1 failed
Linux version 2.4.20-6 (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Feb 27 10:06:59 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196604
zone(0): 4096 pages.
zone(1): 192508 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1666.779 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3322.67 BogoMIPS
Memory: 769884k/786416k available (1347k kernel code, 13912k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03ca084, I/O limit 4095Mb (mask 0xffffffff)
hdc: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63, UDMA(133)
hdb: host protected area => 1
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63, UDMA(133)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2 hdb3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 142k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 3 for device 00:10.3
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 5, pci mem f0849000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 128.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 10:11:09 Feb 27 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal
Adding Swap: 1566328k swap-space (priority -1)
hub.c: new USB device 00:10.1-2, assigned address 2
input0: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb3:2.0
input1: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb3:2.1
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ASUS Model: CRW-5224A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
I tried to install a free modem driver from linuxant(half speed), but the error message said I needed the kernal source code. I will have to download it.
Tim
