D&C Lug - Home Page
Devon & Cornwall Linux Users' Group

[ Date Index ][ Thread Index ]
[ <= Previous by date / thread ] [ Next by date / thread => ]

Re: [LUG] Internet issues...



Can you connect to anything

1) connect
2) ifconfig, check ip for ppp0
3) ping that ip
4) ping ip of f9 server
5) ping ip of non f9 server (144.173.6.8 will do)
6) ping www.bbc.co.uk - see if name resolution works

Also what is th output of typing "/sbin/route" after connection?

[neil@xxxxx neil]$ /sbin/ifconfig ppp0
ppp0      Link encap:Point-to-Point Protocol  
         inet addr:212.56.116.187  P-t-P:194.74.71.166  Mask:255.255.255.255
         UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
         RX packets:271 errors:0 dropped:0 overruns:0 frame:0
         TX packets:419 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 
         RX bytes:186702 (182.3 Kb)  TX bytes:42108 (41.1 Kb)

[neil@xxxxx neil]$ ping -c 3 212.56.116.187
PING 212.56.116.187 (212.56.116.187) from 212.56.116.187 : 56(84) bytes of data.
64 bytes from 212.56.116.187: icmp_seq=1 ttl=255 time=0.090 ms
64 bytes from 212.56.116.187: icmp_seq=2 ttl=255 time=0.111 ms
64 bytes from 212.56.116.187: icmp_seq=3 ttl=255 time=0.107 ms

--- 212.56.116.187 ping statistics ---
3 packets transmitted, 3 received, 0% loss, time 2008ms
rtt min/avg/max/mdev = 0.090/0.102/0.111/0.014 ms
[neil@xxxxx neil]$ ping -c 3 194.74.71.166
PING 194.74.71.166 (194.74.71.166) from 212.56.116.187 : 56(84) bytes of data.
64 bytes from 194.74.71.166: icmp_seq=1 ttl=255 time=139 ms
64 bytes from 194.74.71.166: icmp_seq=2 ttl=255 time=119 ms
64 bytes from 194.74.71.166: icmp_seq=3 ttl=255 time=149 ms

--- 194.74.71.166 ping statistics ---
3 packets transmitted, 3 received, 0% loss, time 2019ms
rtt min/avg/max/mdev = 119.968/136.213/149.507/12.246 ms
[neil@xxxxx neil]$ ping 144.173.6.8
PING 144.173.6.8 (144.173.6.8) from 212.56.116.187 : 56(84) bytes of data.
64 bytes from 144.173.6.8: icmp_seq=1 ttl=241 time=164 ms
64 bytes from 144.173.6.8: icmp_seq=2 ttl=241 time=139 ms
64 bytes from 144.173.6.8: icmp_seq=3 ttl=241 time=139 ms
64 bytes from 144.173.6.8: icmp_seq=4 ttl=241 time=139 ms
64 bytes from 144.173.6.8: icmp_seq=5 ttl=241 time=139 ms
64 bytes from 144.173.6.8: icmp_seq=6 ttl=241 time=139 ms
64 bytes from 144.173.6.8: icmp_seq=7 ttl=241 time=139 ms

--- 144.173.6.8 ping statistics ---
7 packets transmitted, 7 received, 0% loss, time 6064ms
rtt min/avg/max/mdev = 139.909/143.463/164.494/8.585 ms
[neil@xxxxx neil]$ ping www.bbc.co.uk
PING www.bbc.net.uk (212.58.224.56) from 212.56.116.187 : 56(84) bytes of data.
64 bytes from www10.thdo.bbc.co.uk (212.58.224.56): icmp_seq=1 ttl=247 time=138 ms
64 bytes from www10.thdo.bbc.co.uk (212.58.224.56): icmp_seq=2 ttl=247 time=139 ms
64 bytes from www10.thdo.bbc.co.uk (212.58.224.56): icmp_seq=3 ttl=247 time=139 ms

--- www.bbc.net.uk ping statistics ---
3 packets transmitted, 3 received, 0% loss, time 2028ms
rtt min/avg/max/mdev = 138.299/139.412/139.976/0.844 ms

[neil@xxxxx neil]$ /sbin/route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
255.255.255.255 *               255.255.255.255 UH    0      0        0 eth0
nac0431987-plus *               255.255.255.255 UH    0      0        0 ppp0
10.0.0.0        *               255.0.0.0       U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
default         nac0431987-plus 0.0.0.0         UG    0      0        0 ppp0




and yes, i can connect ok to the majority of the rest of the world...

Neil

Attachment: signature.asc
Description: This is a digitally signed message part


Lynx friendly