Inspecting /boot/System.map-2.4.18-4GB Loaded 12771 symbols from /boot/System.map-2.4.18-4GB. Symbols match kernel version 2.4.18. Loaded 515 symbols from 26 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.18-4GB (root@xxxxxxxxxxxxxxx) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000008000000 (usable) <4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) <4>Scanning bios EBDA for MXT signature <4>On node 0 totalpages: 32768 <4>zone(0): 4096 pages. <4>zone(1): 28672 pages. <4>zone(2): 0 pages. <4>Building zonelist for node : 0 <4>Kernel command line: initrd=initrd ramdisk_size=65536 BOOT_IMAGE=linux SuSE=,1203300040,, vga=0x0317 expert=0 <6>Initializing CPU#0 <4>Detected 697.421 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 1392.64 BogoMIPS <4>Memory: 122280k/131072k available (1389k kernel code, 8404k reserved, 406k data, 120k init, 0k highmem) <4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 64K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <4>CPU: AMD Duron(tm) Processor stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <6>PCI: Using IRQ router SIS [1039/0008] at 00:01.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <4>mxt_scan_bios: enter <4>Starting kswapd <4>kinoded started <5>VFS: Diskquotas version dquot_6.5.0 initialized <5>ACPI: APM is already active, exiting <6>vesafb: framebuffer at 0xca000000, mapped to 0xc880d000, size 4096k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:02e5 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture..... found (1024x768, 42648 bytes). <4>Console: switching to colour frame buffer device 105x34 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>PCI: Found IRQ 11 for device 00:01.6 <6>Real Time Clock Driver v1.10e <4>block: 128 slots per queue, batch=32 <4>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>SIS5513: IDE controller on PCI bus 00 dev 01 <4>SIS5513: chipset revision 208 <4>SIS5513: not 100%% native mode: will probe irqs later <4>SiS730 <4> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: FUJITSU MPG3204AT E, ATA DISK drive <4>hdc: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive <4>hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: failed write cache flush, disabling ordered write support <6>hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(100) <4>hdc: no flushcache support <4>hdc: ATAPI 52X CD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: no flushcache support <4>hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache <4>ide-floppy driver 0.99 <6>Partition check: <6> hda: [PTBL] [2491/255/63] hda1 hda2 hda3 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 16 devices) <6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 <6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. <4>ide-floppy driver 0.99 <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 1024 buckets, 8Kbytes <4>TCP: Hash tables configured (established 8192 bind 8192) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing.........................................done. <4>Freeing initrd memory: 4047k freed <4>VFS: Mounted root (minix filesystem). <7>VFS: Disk change detected on device ide1(22,0) <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,64) <6>Non-volatile memory driver v1.1 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,64) <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>PCI: Found IRQ 11 for device 00:01.3 <6>PCI: Sharing IRQ 11 with 00:01.2 <6>usb-ohci.c: USB OHCI at membase 0xc8da8000, IRQ 11 <6>usb-ohci.c: usb-00:01.3, PCI device 1039:7001 <6>usb.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found <6>hub.c: 3 ports detected <6>PCI: Found IRQ 11 for device 00:01.2 <6>PCI: Sharing IRQ 11 with 00:01.3 <6>usb-ohci.c: USB OHCI at membase 0xc8daa000, IRQ 11 <6>usb-ohci.c: usb-00:01.2, PCI device 1039:7001 <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 3 ports detected <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <6>hid-core.c: USB HID support drivers <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,64) <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,64) <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>parport0: PC-style at 0x378 [PCSPP,TRISTATE] <4>imm: Version 2.05 (for Linux 2.4.0) <4>ppa: Version 2.07 (for Linux 2.4.x) <4>WARNING - no ppa compatible devices found. <4> As of 31/Aug/1998 Iomega started shipping parallel <4> port ZIP drives with a different interface which is <4> supported by the imm (ZIP Plus) driver. If the <4> cable is marked with "AutoDetect", this is what has <4> happened. <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>LVM version 1.0.3(19/02/2002) module loaded <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>JFS development version: $Name: v1_0_16 $ <6>SGI XFS with ACLs, DMAPI, realtime, quota, no debug enabled <6>Journalled Block Device driver loaded <6>raid5: measuring checksumming speed <4> 8regs : 1001.600 MB/sec <4> 32regs : 960.000 MB/sec <4> pII_mmx : 1632.800 MB/sec <4> p5_mmx : 2087.600 MB/sec <4>raid5: using function: p5_mmx (2087.600 MB/sec) <6>md: raid0 personality registered as nr 2 <6>md: raid1 personality registered as nr 3 <6>md: raid5 personality registered as nr 4 <4>reiserfs: checking transaction log (device 03:03) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 03:03) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <6>Adding Swap: 136544k swap-space (priority -1) <4>FAT: bogus logical sector size 0 <3>cramfs: wrong magic <4>reiserfs: checking transaction log (device 03:03) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=21 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 120k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>Adding Swap: 136544k swap-space (priority 42) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sun Jun 16 10:13:44 2002 Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.26 (3-Feb-2002) Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal Blocks (total/free): 4962076/4703455 by 4096 bytes Filesystem is cleanly umounted /dev/hda1: clean, 33/6024 files, 4626/24066 blocks doneSetting up /lib/modules/2.4.18-4GB done Mounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw) /dev/hda1 on /boot type ext2 (rw) doneRestore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up the CMOS clock done Setting up linker cache (/etc/ld.so.cache) using ldconfig done Setting up timezone data done Setting up hostname 'linux' done Setting up loopback interface done Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports doneCreating /var/log/boot.msg doneEnabling syn flood protection done Disabling IP forwarding done killproc: kill(1523,29) Running /etc/init.d/boot.local donekillproc: kill(1523,3) Boot logging started on /dev/tty1(/dev/console) at Sun Jun 16 10:27:33 2002 Master Resource Control: previous runlevel: N, switching to runlevel: 5 /etc/init.d/rc5.d/S01isdn start '/etc/init.d/rc5.d/S01isdn start' exits with status 0 /etc/init.d/rc5.d/S01personal-firewall.initial start Starting personal-firewall (initial) [not active] unused '/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6 Initializing random number generator done /etc/init.d/rc5.d/S01random start '/etc/init.d/rc5.d/S01random start' exits with status 0 /etc/init.d/rc5.d/S05network start Setting up network interfaces: lo done '/etc/init.d/rc5.d/S05network start' exits with status 0 /etc/init.d/rc5.d/S06syslog start killproc: kill(1772,15) killproc: kill(1761,15) Re-Starting syslog servicesstartproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/klogd ] done '/etc/init.d/rc5.d/S06syslog start' exits with status 0 /etc/init.d/rc5.d/S07hotplug start Starting hotplugging services [ net pci usb ] done '/etc/init.d/rc5.d/S07hotplug start' exits with status 0 /etc/init.d/rc5.d/S08hwscan start Starting hardware scan on boot'/etc/init.d/rc5.d/S08hwscan start' exits with status 0 /etc/init.d/rc5.d/S08portmap start Starting RPC portmap daemon done startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ] '/etc/init.d/rc5.d/S08portmap start' exits with status 0 /etc/init.d/rc5.d/S08splash_early start '/etc/init.d/rc5.d/S08splash_early start' exits with status 0 /etc/init.d/rc5.d/S08sshd start Generating /etc/ssh/ssh_host_key. Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: 28:b8:ff:ae:b5:d8:92:fe:25:e2:44:90:6c:ef:bc:5e root@xxxxx Generating /etc/ssh/ssh_host_dsa_key. Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 2a:fb:7a:0b:40:5f:ce:85:2a:40:43:83:70:f2:24:6c root@xxxxx Generating /etc/ssh/ssh_host_rsa_key. Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 9c:86:b0:f0:6f:5d:8f:88:fe:0a:fd:55:c6:b5:23:42 root@xxxxx Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done '/etc/init.d/rc5.d/S08sshd start' exits with status 0 /etc/init.d/rc5.d/S09nfs start '/etc/init.d/rc5.d/S09nfs start' exits with status 0 /etc/init.d/rc5.d/S10alsasound start Starting sound driver: already running done '/etc/init.d/rc5.d/S10alsasound start' exits with status 0 /etc/init.d/rc5.d/S10atd start Starting service at daemonstartproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ] done '/etc/init.d/rc5.d/S10atd start' exits with status 0 /etc/init.d/rc5.d/S10fbset start '/etc/init.d/rc5.d/S10fbset start' exits with status 0 /etc/init.d/rc5.d/S10sendmail start Initializing SMTP port (sendmail)startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] done '/etc/init.d/rc5.d/S10sendmail start' exits with status 0 /etc/init.d/rc5.d/S10smbfs start '/etc/init.d/rc5.d/S10smbfs start' exits with status 0 /etc/init.d/rc5.d/S11cron start Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done '/etc/init.d/rc5.d/S11cron start' exits with status 0 /etc/init.d/rc5.d/S11kbd start Loading keymap qwerty/uk.map.gz doneLoading compose table winkeys shiftctrl latin1.add done Loading console font lat1-16.psfu doneLoading screenmap none doneSetting up console ttys done'/etc/init.d/rc5.d/S11kbd start' exits with status 0 /etc/init.d/rc5.d/S11nscd start Starting Name Service Cache Daemonstartproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ SuSE=,1203300040,, HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done '/etc/init.d/rc5.d/S11nscd start' exits with status 0 /etc/init.d/rc5.d/S11splash start '/etc/init.d/rc5.d/S11splash start' exits with status 0 /etc/init.d/rc5.d/S11xdm start Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ PWD=/ SuSE=,1203300040,, LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=en_GB vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm initrd=initrd LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= expert=0 LINES=34 LANG=en_GB LC_NUMERIC= SHLVL=2 COLUMNS=105 LC_CTYPE=en_GB BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done '/etc/init.d/rc5.d/S11xdm start' exits with status 0 Starting personal-firewall (final)/etc/init.d/rc5.d/S21personal-firewall.final start [not active] unused Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final '/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6 /etc/init.d/rc5.d/S21splash_late start '/etc/init.d/rc5.d/S21splash_late start' exits with status 0 killproc: kill(4950,3)